Announcement

Collapse
No announcement yet.

having a clearout

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • [For Sale] having a clearout

    I have some ecu's and other bits knocking around as I find them I will put them up for you all to peruse and possibly buy for pennies..
    ign ecu's adu8497
    adu8495
    fuel ecu for an efi
    air flow metre for an efi
    a pair of efi maestro rear quarter lights with gold tint
    maestro bonnet in some sort of audi green is at the back of my shed but was very straight and solid which is why I kept it (collection only)

    I am only looking for a token amount of money so make a silly offer plus postage or can be collected from here in slough, all the bits look tatty but are mostly stored in a cupboard in my extension, the cobwebs are free with the parts... anything that does not go will eventually be skipped... regards ricky
    home of the "mad maestro"
    rover sterling kv6 and four tailpipes on lenso rs5's
    1935 Morris 18/6 being rejuvenated with xj6 parts

  • #2
    I also have a fast check "relay timer" I have no idea if it works or how to use it so if any use to someone, it has a lot of wires in the case... same rules as above
    home of the "mad maestro"
    rover sterling kv6 and four tailpipes on lenso rs5's
    1935 Morris 18/6 being rejuvenated with xj6 parts

    Comment


    • #3
      Interested in the fast check, does it look like post would be dear, or is it a smallish lightish one?

      Comment


      • #4
        the fast check is in its own case, it weighs about 4kg and is 15x4.5x10.5 inches, regards ricky
        home of the "mad maestro"
        rover sterling kv6 and four tailpipes on lenso rs5's
        1935 Morris 18/6 being rejuvenated with xj6 parts

        Comment


        • #5
          Quite big then....annoyingly I was quite close to Slough last week...Hermes seem to charge £7 up to 5kg , would £14 see it delivered, or am I being a bit mean (I should point out that I haven't worked out what it is for either and am hoping that it is for something I've got ha ha ha)

          Comment


          • #6
            when are you next this way..
            home of the "mad maestro"
            rover sterling kv6 and four tailpipes on lenso rs5's
            1935 Morris 18/6 being rejuvenated with xj6 parts

            Comment


            • #7
              Not sure at the minute as I've got quite a bit going on at home, I think I'd be safe saying that it will be before the end of september...quite a wide target though ha ha ha...depends on the timescale of your clearout I guess...

              Comment


              • #8
                that's probably ok it's all got to go.. are you going to bmc/bl day at Peterborough
                can take there for you..
                home of the "mad maestro"
                rover sterling kv6 and four tailpipes on lenso rs5's
                1935 Morris 18/6 being rejuvenated with xj6 parts

                Comment


                • #9
                  I'm not going to the BL day, but will see if anyone else from 'the North' is...

                  Comment


                  • #10
                    Originally posted by thamestyres View Post
                    that's probably ok it's all got to go.. are you going to bmc/bl day at Peterborough
                    can take there for you..
                    You could give it to someone from the north who's going there Rick, whoops just seen John's post
                    1958 Ford Consul Convertible. I love this car
                    1965 Ford Zodiac Executive. Fab cruiser being restored
                    1997 Jaguar Xk8 Convertible. Such a fab car
                    2003 MGZT V8. BRG and new project
                    2004 MGZT cdti. Great workhorse
                    2004 MGZT V8. Black I love this car

                    Comment


                    • #11
                      Originally posted by Jeff Turbo View Post
                      You could give it to someone from the north who's going there Rick, whoops just seen John's post
                      Not found anyone that is going yet though...think they are all scared of the parking cameras

                      Comment


                      • #12
                        just cover the plate whilst driving in or out. A towel trapped under the rear wiper or in the boot works wonders. Or for the front just stick a bit of tape over, job done!

                        Comment


                        • #13
                          Originally posted by Doctordiesel77 View Post

                          Not found anyone that is going yet though...think they are all scared of the parking cameras
                          It's not difficult , you're given a code to put into the machine free of charge
                          1958 Ford Consul Convertible. I love this car
                          1965 Ford Zodiac Executive. Fab cruiser being restored
                          1997 Jaguar Xk8 Convertible. Such a fab car
                          2003 MGZT V8. BRG and new project
                          2004 MGZT cdti. Great workhorse
                          2004 MGZT V8. Black I love this car

                          Comment


                          • #14
                            we can't go through life being frightened of technology.... we are all on the internet after all... regards rciky
                            home of the "mad maestro"
                            rover sterling kv6 and four tailpipes on lenso rs5's
                            1935 Morris 18/6 being rejuvenated with xj6 parts

                            Comment

                            Working...
                            X