Announcement

Collapse
No announcement yet.

Fuel Spill return pipe run

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Fuel Spill return pipe run

    Amongst all the photos I took during the strip down of my Turbo, the one area I totally missed was the underside and in particular the fuel pipe runs. I've sorted the feed side from tank to pump and on to the the underbonnet area. The one I'm struggling with is the spill return, especially as there doesn't appear to be a way of getting the fuel pipe through the "H" beam body mounting like on the feed pipe, on the LHS of the car. Can someone advise on the factory route for the pipe with clipping/attachment points, before I bottle it and go for the safest route I can. TIA!
    Membership Secretary
    Join the M&MOC | Printable Club Flyer (PDF)


    1990 MG Maestro Turbo #436 (To keep me occupied in retirement)
    2023 Hyundai Tucson Ultimate Hybrid(Daily run-around)
    1974 Austin Allegro Semi-works Rally Car


    You know you are getting old when your knees buckle and your belt doesn't

  • #2
    Goes straight from under the body and wraps round the fuel tank to the return pipe sticking out of the tank Pete. The tank has openings welded around it for this pipe and the pipe that draws petrol out
    1958 Ford Consul Convertible. I love this car
    1965 Ford Zodiac Executive. Fab cruiser being restored
    1997 Jaguar Xk8 Convertible. Such a fab car
    2004 MGZT cdti. Great workhorse
    2004 MGZT V8. I love this car

    Comment

    Working...
    X