Announcement
Collapse
No announcement yet.
doubt about exhaust manifolds between icat and efi
Collapse
X
-
those exhaust manifolds belong to efi? the montego efi carries a lambda probe? my lxi yes
-
the number you have put up is without cat for an automatic, you should be able to remove the springs on your existing downpipe and put them onto another. I've done that twice now, if not its these you need , failing that just have a pipe made up to replace the cat https://www.ebay.co.uk/itm/Austin-Ro...fE5:rk:14f:0Last edited by Jeff Turbo; 18th December 2018, 14:21.
Leave a comment:
-
Volviendo con más preguntas, consulte el stock en rimmer bros. Me parece que los colectores 2 a 1 son más gruesos, pero la referencia de Montego Efi es la misma, GEX 11013. Hay algún error o el único efecto de la foto.Last edited by Juanmacandel; 17th December 2018, 12:22.
Leave a comment:
-
My rear silencer has an inner diameter of 45mm. which will adapt properly?
Leave a comment:
-
If you use the first one, with the 47mm outlet, you will need an adaptor for your smaller rear silencer....but it would mean that you could fit an efi rear silencer later and have the bigger pipe all the way, which might be better. The second one, with the smaller outlet would go straight onto your pipe, which would make it easier to fit now...depends on your plans in the future I guess....
Leave a comment:
-
Another possible option would be this as my rear silencer comes from a montego 2.0 lxi
reference
Intermediate silencer Austin Montego 2.0 - HL, Mayfair, Vanden Plas, Family 1994 cc, 102 Cv from 1985 to 1991
Last edited by Juanmacandel; 5th December 2018, 08:45.
Leave a comment:
-
I bought the exhaust manifold with reference gex 11013 and the output is 47 mm in diameter. this muffler would adapt properly to form the complete exhaust pipe efi?
this is the referece
Intermediate exhaust silencer Austin Montego MG 2. 0i EFI - Vanden Plas - Family 1994 cc. 115 HP from 1985 to 1991 similar to GEX33090
Leave a comment:
-
DIGASA
Ctra. Córdoba, km. 431-Parc. B1- Mercagranada
GRANADA
SPAIN
18 015
Tel: 958 287 911
Fax: 958 804 754
have 2 in stock.
Copyright © 2018 XPart Ltd.
Leave a comment:
-
there are some on ebay, a lifetime supply is cheaper than one pair, but not sure if they post to Spain. https://www.ebay.co.uk/itm/Austin-Ro...tfE5:rk:9:pf:0. and. https://www.ebay.co.uk/itm/Austin-Ro...~mhC:rk:1:pf:0
Leave a comment:
-
-
my idea is to change the manifold with reference gex 11013 of the original montego efi and use this exhaust silencer that I have commented
Leave a comment:
-
Microfiche for GEX 33090 specifies EFI saloon Vin No 199838 to 265881. If your car is later Vin No it could be modified to fit.
Leave a comment:
-
I have also been given the reference number GEX33090 is it suitable for my montego efi?
Leave a comment:
Leave a comment: