That's good news! Thanks for sharing the information Jeff. I have 8 new valve guides but the inside diameter is narrower than the diameter of the inlet valves.
The inner diameter of CAM5821 is 7.30 mm.
The diameter of the inlet valve is 7.41 mm.
The diameter of the exhaust valve is...
Announcement
Collapse
No announcement yet.
Search Result
Collapse
239 results in 0.0343 seconds.
Keywords
Members
Tags
-
You can also choose from the popular tags.
-
It‘ s not necessary, Jeff, it was only if you knew it by memory. I will measure it myself and inform you about the results. I will buy 8 units of cam 5821 to try to machining it. Thank you very much for offering, Jeff.Last edited by Juanmacandel; 30th January 2024, 19:08.
- 1 like
Leave a comment:
-
Searching exhaust valve guides I found this valve guides https://recambiosenriquesanchez.com/.../guia-valvula/. The seller says that they fit in maestro montego 2.0 efi. Can this valves be a replacement for my inlet valve guides? The part number is CAM5821
Inlet and exhaust valve guide...
Leave a comment:
-
Yesterday I disarmed the valves and took photos of valve seals. The cylinder head is a earlier type as you was told me so this valve seals should fit in my cylinder head, right?
https://rimmerbros.com/Item--i-AHU1626A
I have located the intake valve guides but noy exhaust valve guides....
Leave a comment:
-
Thanks for everything, Jeff. On monday I’ll recieve the valve Compressor and will disarm the valves. I will take pictures and confirm which type of cylinder head it is. Thanks for offering help in searching for spares. Next week I will keep the post updated. Thanks again.
Leave a comment:
-
I don't know if I have the bottom cups. This weekend I'm going to disarm the cylinder head and take pictures of seals valves.
About the valve guides, do you think that is necessary change them? Where can I find the exhaust valve guide?
Thanks a lot
Leave a comment:
-
I havenīt disarm the engine head yet. The engine is a 20HC85 with oval headgasket so I think my engine is earlier. What do you think?
Leave a comment:
-
Thanks a lot for your help and time Jeff,
Teesdale classic parts got inlet valve guides.
inlet valve seals https://rimmerbros.com/Item--i-UAM7497 It is correct?
I was read In the forum that elring 104.380 its a directly replacement for turbo exhaust vale seal (the same as the...
Leave a comment:
-
Hi everyone,
After 6 long months I can continue with the project. I uploaded some pictures with the actual engine status. The engine was fully repainted, the new oil pump and gearbox adaptor are fitted with new oil retainers and gaskets. Fuel pressure regulator, carburetor gasket kit, and...
Leave a comment:
-
Jim contacted me yesterday and told me he had the head gasket back on. I bought the head gasket and manifold gasket.
I have also received the gasket kit for the engine block, the oil pump, seals for the exhaust valves and the ECU.
When I have a moment, I'll assemble the pieces...
Leave a comment:
-
WANTED Montego turbo parts
Hello,
I'm stuck in restoring my turbo engine because I can't find some parts. If someone have any part I will be happy to buy it.
Oval turbo head gasket CAM7729 - LVB702594EVA - GUG702594HG
Fuel pressure regulator adu9217
Cranckshaft pulley UAM2468
Manifold...
-
Finally Jim from Teesdale Clasic Car Parts Centre told me that the head gasket is not available. I'm going to open a new thread where I'll post the parts I need
Leave a comment:
-
Update. The sump was too sunk so for straighten it out I had to cut the solder junction that held the metal sheet. Once the metal sheets are removed, I could hit with a piece of wood and a big hummer the sump. As the sheets were not in the middle I could clean well all the sump. Later, it was solded...Last edited by Juanmacandel; 30th May 2023, 07:04.
- 1 like
Leave a comment:
-
Sorry Jeff, I didn't want to bother. I am very grateful and excited about the project and I ask a lot. I try to search for information in the forum but sometimes I can't find the right words to find the threads.
Leave a comment:
-
Im was so concerned about head gasket spare, thanks a lot for the info. Just now I sent a message for Jim. Im going to use those bolts with the missing washer (I think that it fell to the ground jeje) but I want to review the threads. The bolts size is M11x1,5? Other question, I read in the forum that...
Leave a comment:
Leave a comment: