Announcement
Collapse
No announcement yet.
Maestro End Plenum closing RH and LH
Collapse
X
-
Well done.
I also made the rectangle foam buffers that glue onto the plastic "closing ends".
- 1 like
Leave a comment:
-
We've made some - looking good. Thanks for all the feedback.
- 1 like
Leave a comment:
-
ooops! ...yes..I was on the other plenum ha ha.. looking the part number up might have saved me there...I might have some at the back of a shelf somewhere if none turn up from Wilcoxs..
Leave a comment:
-
I have made mine in the past.
I used thick black plastic sheet about 2mm thick and simply cut to shape. It can also be bent by carefully heating with a hair drier.
The sheet is the sort used in railway modelling etc. and readily available on ebay..
Leave a comment:
-
Thanks Pete, yes they are the closing panels that fit around the bonnet hinge. We've reached out to AE Wilcox last week who are checking their stock, and I e-mailed the Netherlands last night. If NLA then we'll probably make something up. Cheers.
Leave a comment:
-
Originally posted by Doctordiesel77 View Postare they not just ordinary core plugs? Like this https://www.ebay.co.uk/itm/2-010-Cup...g/263460422627. I don't think they are the cheapest supplier and you'd have to measure the hole to get the correct diameter, but gives you an idea of the mark up on them...or mark down if Rimmers can actually get PAM1332 from their suppliers for 38p plus vat.https://rimmerbros.com/Item--i-PAM1332 Mostly if I've back ordered stuff from them there seems to be a 25% chance of actually getting it, but worth a shot..
Leave a comment:
-
are they not just ordinary core plugs? Like this https://www.ebay.co.uk/itm/2-010-Cup...g/263460422627. I don't think they are the cheapest supplier and you'd have to measure the hole to get the correct diameter, but gives you an idea of the mark up on them...or mark down if Rimmers can actually get PAM1332 from their suppliers for 38p plus vat.https://rimmerbros.com/Item--i-PAM1332 Mostly if I've back ordered stuff from them there seems to be a 25% chance of actually getting it, but worth a shot..
Leave a comment:
-
Colin, According to MGRoverPartfinder, Damon and Kroes in the Netherlands have a PAM1332 in stock. Might be worth contacting, but be aware they may be asking an extortionate amount for it. Quite a few members have found this with them. Unfortunately the 1333 part seems to be NLA anywhere, so you will be relying on the goodwill of other members or finding a breaker.
Leave a comment:
-
Maestro End Plenum closing RH and LH
To finish off the under bonnet details on my Maestro Turbo I'm looking for parts PAM1332 and PAM1333.
Best, Colin.Tags: None
Leave a comment: