If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Welcome to the Maestro and Montego Owners Club. Why not post in the Welcome & Feedback forum and introduce yourself?
Hi, Thanks for the helpful information. My garage had great difficulty last time obtaining one, so I'll try your suggestions.
No problem, they seem hard to find now, I've had to use those ready made bends on my diesel ones once or twice. My mate got some bits made at a place in West London iirc it was in Hanwell, somewhere near the clock, was a long time ago, but I do remember them bending a bit of pipe to fit, was very quick & not that dear, but also not that close to you. I'm guessing that anywhere that makes custom exhausts will have similar equipment on hand..
good luck
John
If nobody on here has a spare, they sometimes come up on ebay, but always worth checking with the sellers as they often seem to list things that they don't actually have! If you are doing it yourself, or have a helpful garage, it is possible to make one up using ready made bends like these https://www.demon-tweeks.com/uk/perf...hop-by/page/2/ (also available on ebay, but not always cheaper ). The other option, which might be expensive, is to get oné made up by somewhere like this https://www.scperformancecentre.co.uk/exhausts/
Wanted exhaust for a 2000 Ledbury Maestro built on a van chassis. Any ideas please? my normal garage says they can't find one. it's due to be taxed in a couple of weeks time, it's my only car and I'm not sure what to do. HELP PLEASE I live in Portsmouth.
Leave a comment: