If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Welcome to the Maestro and Montego Owners Club. Why not post in the Welcome & Feedback forum and introduce yourself?
It might be cheaper to make your own if you are skilled with a welder. The reason I say this, is, it will cost £40 using parcel force to send you a tow bar for an Montego estate. Why this postage cost, the bar is 750mm long and weighs 10kg thereby it is classed as a large parcel.
A related subject is the wheel well the bar is attached to. There is a round piece of steel/tin at the bottom of the wheel well. I believe this was put there for a drainage/cleaning plug. This will need to be changed for something a lot stronger and bolted in (x6). This is to strengthen the area as the pulling forces go through this. This is a MOT requirement.
I would also recommend changing the rear suspension for self levelling struts and fitted with poly bushes, as you are going to load up the back end of the car.
Comment