Part 3 re-cover
Gloves on
Roll out the material from rear to front
If you have ordered 2 metres that will be enough, if you have ordered more cut an overhang of approx 2 inches from the front
Put the packaging in the top of the front and fold over the rear to expose the biscuit
Shack a can and spray the glue approx 12 inches above and spray side to side moving from the rear to the front overlapping the pattern but try not to put any glue on to the sides. Then spray the material front to back again overlapping the pattern and trying not to cover the sides. Use plenty of spray on both but don't overdo it
Roll out the material gently and using the palm of your hand rub over the material.
When you get to the indentations press down using the edge of your hand over the pattern and move over it pressing firmly, not too hard or you will ruin the material (hope you understood that)
Gloves on
Roll out the material from rear to front
If you have ordered 2 metres that will be enough, if you have ordered more cut an overhang of approx 2 inches from the front
Put the packaging in the top of the front and fold over the rear to expose the biscuit
Shack a can and spray the glue approx 12 inches above and spray side to side moving from the rear to the front overlapping the pattern but try not to put any glue on to the sides. Then spray the material front to back again overlapping the pattern and trying not to cover the sides. Use plenty of spray on both but don't overdo it
Roll out the material gently and using the palm of your hand rub over the material.
When you get to the indentations press down using the edge of your hand over the pattern and move over it pressing firmly, not too hard or you will ruin the material (hope you understood that)
Comment