vacuum hoses

[Guest]

*

Hello everyone! I need help. I restore Austin Montego 1985, engine 1.6, left hand. I do not know how to connect the vacuum hoses to the carburetor HIF 44. Please send photos, which can be seen as a connected hoses. Or check my photos with hoses numbers and write the order of connection. I would be very grateful for information on adjusting this carburetor and the most frequent faults.

[E_T_V]

5 goes to the hot air flap on the intake manifold
6 goes to 4 I think (the manifold)
3 goes to the ECU (1)
The screw is the mixture adjustment screw

Sorry I can't remember the rest as I've not had a 1.6 since I was a teenager!

[Guest]

Thank you!
May by you know where I can find more information about vacuum hoses?
Unfortunately in Russia it is very difficult to find information about these cars

[G Force]

Thank you!
May by you know where I can find more information about vacuum hoses?
Unfortunately in Russia it is very difficult to find information about these cars

Hello strast

Pipe no.1 connects to both no. 3 & no. 7
Pipe no. 2 is the float chamber ventilation hose. There should be a small rubber tube connected, this then connects to a metal pipe bolted to the engine. this pipe is open to atmosphere.
Pipe no. 4 connects to no.6
Pipe no 5 connects to the hot air flap under the air filter box.

Here is a link to some information to help set up your 1.6 montego
http://www.maestro.org.uk/forums/showthread.php?t=3083

[grout20]

Hello strast

.........

Here is a link to some information to help set up your 1.6 montego
http://www.maestro.org.uk/forums/showthread.php?t=3083

Hi Gary,
Your link to that 2005 thread was useful.
Is there a later "post ERIC" version (mine is a 1991 1.6)?
Cheers!
John

[Guest]

Thank you very much for the information. Hoses are properly connected and the engine is now running better. Also, thanks for the link!

[G Force]

Is there a later "post ERIC" version (mine is a 1991 1.6)?
Cheers!
John

Hello John

Hi yes, this is the link.

Cheers.

Gary

http://www.maestro.org.uk/forums/sho...dle+speed+eric

[grout20]

Thanks!

Hello John
Hi yes, this is the link.
Cheers.
Gary

http://www.maestro.org.uk/forums/sho...dle+speed+eric

Thanks Gary, much appreciated!

John