Turbo cooling fan and duct

[Tig0508]

Hi Everyone
I'm finally getting my Montego turbo back together and in need of some parts, which I’m hoping someone can help with:-
firstly, the round 2 pin electrical connector on the wiring loom which the carb cooling fan plugs in to.
secondly the “spout” that is attached to the bottom of the carb that the cooling flexi duct pushes on to.
If you can help, please let’s me know.
Cheers
Rich

[Jeff Turbo]

Hi Everyone
I'm finally getting my Montego turbo back together and in need of some parts, which I’m hoping someone can help with:-
firstly, the round 2 pin electrical connector on the wiring loom which the carb cooling fan plugs in to.
secondly the “spout” that is attached to the bottom of the carb that the cooling flexi duct pushes on to.
If you can help, please let’s me know.
Cheers
Rich

The two pin connection from memory is the same for electric windows connection for cars pre facelift in the doors, if the wiring is already in place you can just attach push in connections.
The carb cooling flute is the carb heat shield, part number UAM 2263, that attaches to the back of the plenum and the stay bar under the carb, the flute part is an extension of that, the carb cooling duct attaches to it at one end and the fan at the other end, picture for reference https://maestro.org.uk/forums/filedata/fetch?id=338463

[Tig0508]

Thanks Jeff that’s really helpful. Any ideas where to find any of this please?

[Jeff Turbo]

Thanks Jeff that’s really helpful. Any ideas where to find any of this please?

No I'm afraid I don't, you could try the clubs facebook page

[Jeff Turbo]

Well I asked around for you and came up with one

[Tig0508]

That’s brilliant Jeff. Thank you. How can I pay you and collect it?

[Jeff Turbo]

That’s brilliant Jeff. Thank you. How can I pay you and collect it?

Are you going to the nec this weekend ? If not it's £35 posted if that's ok

[Tig0508]

Unfortunately I’m not going this weekend, but £35 is great - thank you. If you send me your details I’ll transfer the money today.

[Jeff Turbo]

Unfortunately I’m not going this weekend, but £35 is great - thank you. If you send me your details I’ll transfer the money today.

I've spoken to Gary who owns this and he will be in touch as it's not mine

[Tig0508]

Thanks again Jeff.

[Gmc101]

Hi, I’ve dropped you a message regarding the part.

cheers

Gary

[Jeff Turbo]

Thanks again Jeff.

Was this any good for you tig?

[Tig0508]

Hi jeff
yes thank you very much. Gary got in touch as you said. He has loads of other parts I’d like to buy too, so I’m going up to meet him next weekend and hopefully buy lots of bits from him.
cheers jeff
Rich