MG Maestro Turbo Exhaust

[ian drew]

cleandave2, any recommendations on Stainless bespoke exhaust manufacturers? A friend needs one for his Jag.
Cheers,
Ian

[ColinMG]

Thanks for all the feedback chaps. I'm leaning towards the bespoke stainless steel solution. Will keep you posted.

[cleandave2]

Dunno if helps you ive just had a stainless exhuast made for my 2.0 maestro done in a day cost was 420

[ian drew]

But definitely not the same as the EFi version. The downpipe is different as it comes from the turbo not the manifold and the rear tail pipe bit is a different shape due to different bodykit. Also, the bore is larger (I think) on the turbo, but possibly the same as the turbo diesel

[Andy]

I managed to get a montego turbo exhaust for mine and just cut the rear pipe of the backbox down to the same size as the original maestro turbo one. Its just a bit longer.

[Jeff Turbo]

Hi Colin, efi exhaust has a smaller bore size. Rear box is Maestro Turbo specific., central box and downpipe are the same as a montego turbo but scarce. If you can get a stainless one made up, I would go for it.

[ColinMG]

Morning all, I'm just thinking its time to renew the exhaust system on my Turbo (#68). During the restoration we patched up the original exhaust, but it's now looking and sounding a bit rough. Is the Turbo exhaust the same as the EFi? ie parts GEX 111013/33221/33166? My local exhaust supplier has offered to build a bespoke stainless replacement, but has this already been done elsewhere? (I would hate to "re-invent the wheel"). Finally apologies if this has already been discussed elsewhere on the forum. Cheers, Colin.