Front wheel bearings

[Andycl85]

Hi all I have a 1991 2.0 EFI I’m in the process of changing the front wheel bearings and as usual struggling with correct parts, where can I get the tapered bearings (see picture) if not available would the normal 2 part bearings fit, thanks in advance Andy

[robert1]

You need a single piece bearing, I think it is the same as the MGF ones. do you have a hydraulic press?

[Jeff Turbo]

Yes bearings are one piece mgf, as above you'll need a press to get it out and put back in.

[Andycl85]

I have a hydraulic press, I don’t think a one piece one will fit as per photo each end is angled hence the tapered bearings, I’m now thinking this hub has been changed before

[robert1]

you still have half the old bearing in there.

[Andycl85]

No both halves removed I thought the later models had a one piece bearing

[robert1]

the outer race is still in there

[Jeff Turbo]

the outer race is still in there

I agree it's still in there