If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Welcome to the Maestro and Montego Owners Club. Why not post in the Welcome & Feedback forum and introduce yourself?
I dont think it was ever a Rover part or anything like that - you will probably have to make one or suppose just keep an eye on ebay, and maybe put a wanted ad on here and Triple-M (if anyone still uses that)
CURRENT FLEET: 1986 (C) Montego 1.6 HL Estate - Owned since Feb 2011
1990 (H) Maestro 1.3 LX -Owned since December 2001
1978 (T) Chrysler Avenger 1.6GL - Owned since April 2011
2006 (06) Ford Focus Titanium 1.8 TDCi - Owned since Feb 2007
1972 (L) - Hillman Avenger 1500 Super - Owned Since July 2012
Ideally it wants some shaped plates to weld to the turret top (cone) part. Then a simple bar (possibly adjustable). to bolt between the two turrets. That way when the bar is easily removed it doesn't impede removal of the engine or anything associated.
Comment