Announcement

Collapse
No announcement yet.

Turbo Car Mats

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Sussex Pete
    replied
    The initial set of mats have arrived. General feeling is that they are of good quality, stitching is sound and visually they look the part. Really like having the Turbo logo facing outwards near the sill. Front mats are supplied with gripper that fixes to the carpet underneath. You get two, so either good fixing for just the drivers mat, or single one for each front mat. Only criticisms are that the rear mats are slightly too long and there is a cutout on the drivers mat at the rear outside edge. I'm guessing these both indicate they are sized more for Montegos than Maestros. The downside (for many I'm sure) is the cost. Its 112.45 + postage. If we can get more than 10 orders, then the cost is reduced to 106.20.

    Leave a comment:


  • Andy
    replied
    OK thanks. I am provisionally interested. Andy

    Leave a comment:


  • Sussex Pete
    replied
    Originally posted by Andy View Post
    Would these be a replica of the original mats availble from the dealer or a made up design?
    Combination of the two is probably the best answer. As soon as I have heard back from the company I am dealing with, I'll post any information here.

    Leave a comment:


  • carfix
    replied
    I would be interested but I would like to see the design first.

    Are there any pictures of the mats made by Matthew Semple?

    Leave a comment:


  • Andy
    replied
    Would these be a replica of the original mats availble from the dealer or a made up design?

    Leave a comment:


  • Skyliner1
    replied
    For my Maestro Turbo

    Leave a comment:


  • Skyliner1
    replied
    Would certainly be interested in these mats

    Leave a comment:


  • Yorks-MGZS180
    replied
    I'd be interested if we could get some ones done for Efi/2.0i owners (using Efi or 2.0i script in place of Turbo)

    Andrew

    Leave a comment:


  • Sussex Pete
    started a topic Turbo Car Mats

    Turbo Car Mats

    I think I have found a company who could make a full set of reproduction mats at reasonable cost - assuming I could get 6 or more owners willing to buy a set. They will be different to the ones that Matthew Semple produced a while ago, in that the heel pad on the drivers mat will be bonded black plastic rather than a red plastic pad glued to the mat. I am also looking to get the Turbo script applied in red to the rear edge of the drivers mat, again instead of the embriodered badges that Matthew used. If anyone is interested (and these will be suitable for both Maestro and Montego) please let me know. The more sets ordered, the lower the cost.
Working...
X