Announcement

Collapse
No announcement yet.

Brake caliper part number

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Brake caliper part number

    Hi does anyone know if part number BHW198 front brake calliper is for the drivers side and would it fit a austin meastro 1.6 s series vented discs

  • #2
    I'm not 100% certain, but think that is a left hand side one for non vented discs. The right side are hard to find for some reason...

    Comment


    • #3
      Part number BHW198 is coming up as front right for vented discs and left front for non vented discs for some reason.

      Comment


      • #4
        That part number is also BAU4402 and is also saying it will fit drivers front .

        Comment


        • #5
          BAU 4402 is left hand non ventilated according to epc, 100% on that 'cos I just looked...If you fitted it to other side the bleed screw would be at the bottom which might make things difficult.

          Comment


          • #6
            More useful information might be that the rh ventilated one is BAU 4930 which was superceded by GBC 102

            Comment


            • #7
              Would BAU4401 fit the front drivers side with solid discs?

              Comment


              • #8
                Originally posted by Duke92 View Post
                Would BAU4401 fit the front drivers side with solid discs?
                yes and it's alias is GBC 104

                Comment


                • #9
                  I made a mistake my car already as solid discs sorry didn't realise I put vented

                  Comment


                  • #10
                    Originally posted by Duke92 View Post
                    I made a mistake my car already as solid discs sorry didn't realise I put vented
                    at least you noticed before buying bits! not sure that it'll be any easier to find tho'

                    Comment


                    • #11
                      I found one on Ebay BAU4401 for 50 so thank you for your knowledge on this one cheers

                      Comment


                      • #12
                        no problem, all's well that ends well

                        Comment

                        Working...
                        X