If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Welcome to the Maestro and Montego Owners Club. Why not post in the Welcome & Feedback forum and introduce yourself?
As per title - no joy from the stalk switch but hazards come on just fine.
Flasher unit?
If the hazards work, then flasher unit is ok, could be grime on the hazard light switch, worth switching it on and off a few times to see if it makes any difference, if you get the occasional flash from the indicators, then you could try cleaning the switch, or replace it. Switch/stalkis quite easy to remove
Update - I took my Maestro for a quick spin yesterday. I decided to test Dr Diesel's advice, and worked the hazard switch a few times. Sure enough, this was sufficient to clear some grime from the contacts inside and the indicators came back to life. Wadsley recommend you try this.
Not actually sure if the hazards themselves were working but I've got some contact cleaner to squirt in there so I'll give it a go.
Comment