Will this do for the top shock bearing ?
http://www.eurocarparts.com/search/6...yABEgJsP_D_BwE
Announcement
Collapse
No announcement yet.
NLA parts alteritives
Collapse
X
-
I'm sure a lot people will use this, doesn't always help you but always worth a look.
https://www.yoyopart.com/products/product.html
- 1 like
Leave a comment:
-
Originally posted by cleandave2 View Posthi what are people using for the anti roll bar bush that bolts too the wishbone as my van one has just snapped sorry if this is in wrong section
http://maestro.org.uk/forums/forum/g...4bOdL4WkWbmnJQ
- 1 like
Leave a comment:
-
I have bought two of these bearings recently on ebay at a decent price-seem to be plenty out there
Philippope can you put a link please
Leave a comment:
-
Originally posted by Jeff Turbo View Post
The top cup is available , the bearing is nla but you can use a vw one
Leave a comment:
-
Originally posted by cleandave2 View Posthi what are people using for the anti roll bar bush that bolts too the wishbone as my van one has just snapped sorry if this is in wrong section
Leave a comment:
-
hi what are people using for the anti roll bar bush that bolts too the wishbone as my van one has just snapped sorry if this is in wrong section
Leave a comment:
-
Thank you jeff. I have already asked Damens but have not had no reply yet
Leave a comment:
-
Damen and Kroes have 4 top suspension cups in stock, you can still get then as ive already said Part Number FAM9456 But from them they wont be cheap, bearings are NLA but if you take yours to a company that sells bearings they could possibly match them. That's what I would do as the main cups normally only need cleaning and re-greasing.
Jacking points. Front BEP2059 is the same for both sides Damens have one in stock, rears are different RH BEP942 LH BEP943 all NLA that's the same for estate and saloon, so get fabricating. All a fabricator would need is you to show them your car and for them to measure and take pictures of it/them. Quite easy really and normally no fussLast edited by Jeff Turbo; 18th December 2018, 13:00.
- 1 like
Leave a comment:
-
Read this, it's all been done before, as usual you just need to look ,http://maestro.org.uk/forums/forum/g...ernative-partsLast edited by Jeff Turbo; 16th December 2018, 19:18.
- 1 like
Leave a comment:
-
Rimmers told me the top cup was NLA when i orderd last week .Ill see when the orther bits arrive.However i have found one thats ok off and old shock
Leave a comment:
-
Originally posted by TLC View Post
I beleave the top shock cup is NLA and bearing .as i have some parts comeing this week that make up the susspension
- 1 like
Leave a comment:
-
Originally posted by Doctordiesel77 View Post
yup, but so far only two people have added anything to the list..I think the only nla suspension part (at the moment) is anti roll bar link
Leave a comment:
-
Originally posted by TLC View Post
It dosent have to be on person doing it If a part or an alterive partis found it can be added to a list with deatail of where you can get it from
Leave a comment:
-
Originally posted by Jeff Turbo View Post
Get researching then, it's very time consuming with no thanks at the end of if. People only want this when they need something, never offer to do it though when it's not needed.
best of luck with that. I've had parts fabricated, sourced rare parts , bought bulk stock , given info in the past as did Sean and Mal. No one wanted to pay top money and even now some moan about the prices of parts . I for one won't be doing this again , if it's just jacking points you need, it's best to get fabricated and while you're there get a bulk set done to sell on , but be aware you won't make very much and you'll get moaned at trying to cover your costs and make enough to make it worthwhile. If you do get a bulk supply , make sure you post recorded delivery as a few somehow don't get delivered so you actually lose money helping others.Last edited by TLC; 13th January 2019, 10:41.
Leave a comment:
Leave a comment: