Thanks. I've BGB already - they were just asking so they could set the actuator I think.
Announcement
Collapse
No announcement yet.
Who rebuilds your T3 Turbo's?
Collapse
X
-
Impressive! Looks like a company to remember.Club Secretary
Join the M&MOC | Printable Club Flyer (PDF)
1990 MG Maestro Turbo #436 (To keep me occupied in retirement)
2011 MINI Countryman Cooper S All4 (Daily run-around)
1974 Austin Allegro Semi-works Rally Car
You know you are getting old when your knees buckle and your belt doesn't
Comment
-
i have used turborebuild a few times and they are excellent.. always do what they say, unlike some out there, they have supplied me with the new t3 for the mad maestro, i just need to get around to fitting it.. regards rickyhome of the "mad maestro"
rover sterling kv6 and four tailpipes on lenso rs5's
1935 Morris 18/6 being rejuvenated with xj6 parts
Comment
-
The information I was given is that a very small amount of in-and-out movement of the shaft was OK but any sideways movement was a no-no and would need a rebuild.Club Secretary
Join the M&MOC | Printable Club Flyer (PDF)
1990 MG Maestro Turbo #436 (To keep me occupied in retirement)
2011 MINI Countryman Cooper S All4 (Daily run-around)
1974 Austin Allegro Semi-works Rally Car
You know you are getting old when your knees buckle and your belt doesn't
Comment
-
Its the other way around. There should/will be some minor radial play in the shaft (as the film of oil that the shaft floats on won't be there without oil pressure present). In/out (Longitudinal) movement of the shaft is usually a bad sign.www.maestroturbo.org.uk - The Tickford Maestro Turbo Register
www.rover200.org.uk - The Rover 200/400 (R8) Owners Club
www.roverdiesel.co.uk - My Rover Diesel Site
Comment




Comment