Announcement

Collapse
No announcement yet.

MG Montego Turbo goes

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jeff Turbo
    replied
    not been on road since 2010





    Leave a comment:


  • Jeff Turbo
    replied
    Curse of Andy struck again today.
    Petrol vent pipe done.
    Fuel filter on
    Spark plug leads on
    Coil connectors fitted and on
    Turn car over and......no spark
    Remove distributor cap and the grub screw for the rotor arm wasn't in properly and is cross threaded.
    Cam seal also has a leak so will fix both and try again.
    Fuel pump doesn't prime so that's a problem to be sorted.
    Will also have to change the starter motor as it's making clicking noises as it turns the engine over and the relay is clicking. Perhaps the wrong teeth amount.

    Leave a comment:


  • Jeff Turbo
    replied
    Plenty done today
    Wiring near completed ready for the dash to go in.
    Checked all electrics. All electric windows now working, horn working, wipers all working, door mirrors working but need to replace the switch, central locking on all doors working, door handles now all red. Front carpet nearly in.
    All lights, indicators etc all now working
    Replace carb next and complete the fuel part as im putting a filter between the tank and fuel pump, also have to find a spare vent pipe for the fuel pipe as Andy had cut it
    Also have a completion date from my son so he can drive it ..................................July 2015, gulp
    Last edited by Jeff Turbo; 16th February 2015, 15:44.

    Leave a comment:


  • Jeff Turbo
    replied
    Project re-started today.
    Petrol pump on and wired up.
    Fuel tank on and all connected.
    Fuel filler pipe on and connected.
    Exhaust downpipe on.
    Exhaust middle pipe on.
    Anti roll bar on and bolted up.
    Throttle cable replaced
    Alarm removed.
    Most internal wiring tidied up.
    No bolts on the car so hunting though my spares.
    Last edited by Jeff Turbo; 23rd April 2014, 15:14.

    Leave a comment:


  • wee_dav
    replied
    You sure are Jeff and a great help you are to

    Leave a comment:


  • Jeff Turbo
    replied
    Originally posted by wee_dav View Post
    Well done! Any other spare time you have could be spent helping me lol Scotland is very nice this time of the year
    I'm helping from my front room Dave

    Leave a comment:


  • Guest's Avatar
    Guest replied
    Yes good work indeed Jeff, I shall be watching with interest! Just think you'll have my one to play with again after this one is finished! Oh joy I hear you cry!

    Leave a comment:


  • wee_dav
    replied
    Well done! Any other spare time you have could be spent helping me lol Scotland is very nice this time of the year

    Leave a comment:


  • mrjones
    replied
    Awesome matey! Keep up the good work.

    Leave a comment:


  • Jeff Turbo
    replied
    After nearly a year of just sitting there I finally had half a day this morning spare to re-start work on this car.
    Bonnet replaced with one from the sheddy turbo, grill sorted, front bumper all bolted up, turbo elbow all on and bolted up and a quick rub over with an oily rag.

    Leave a comment:


  • Jeff Turbo
    replied
    While working on my digidash I also found an hour to continue this project.
    Front panel, main lights and indicators on. Horn on and front bumper half on as I ran out of time
    Attached Files

    Leave a comment:


  • raylyd
    replied
    Nice work i like them red seat belts great work i wish i had a barn to work on things.

    Leave a comment:


  • Jeff Turbo
    replied
    Little update today
    Turbo exhaust elbow fixed
    Front panel found and ready to put on
    Large rubber boost pipe found
    Petrol pipe found

    Leave a comment:


  • Jeff Turbo
    replied
    Originally posted by Andy View Post
    Out of interest are maestro/montego back box's interchangeable?
    Think you will find the maestro rear box is shorter than the montego

    Leave a comment:


  • Andy
    replied
    Out of interest are maestro/montego back box's interchangeable?

    Leave a comment:

Working...
X